BACKGROUND:
During the 2018-11-14/15 meeting in Sanya, China, the WE-OMC tasked the Chair with the development of a list of standards for use in the WE-OMC. Below you will find the list of standards provided by the WE-OMC Chair that have been approved by the WE-OMC Member Bodies (see WE-OMC/393/RV published on 2019-02-28):

IEC 61400-1:2005
Editin 3.0
IEC 61400-1:2005+AMD1:2010 CSV
Edition 3.1
IEC 61400-1:2005+AMD1:2010 CSV/COR1:2016
Wind turbines – Part 1: Design requirements

IEC 61400-2:2013
Edition 3.0 (2013-12-12)
Wind turbines – Part 2: Small wind turbines

IEC 61400-3:2009
Edition 1.0 (2009-02-11)
Wind turbines – Part 3: Design requirements for offshore wind turbines

IEC 61400-4:2012
Edition 1.0 (2012-12-04)
Wind turbines – Part 4: Design requirements for wind turbine gearboxes

IEC 61400-11:2012
Edition 3.0 (2012-11-07)
IEC 61400-11:2012+AMD1:2018 CSV
Edition 3.1 (2018-06-15)
Wind turbines – Part 11: Acoustic noise measurement techniques

IEC 61400-12-1:2017
Edition 2.0 (2017-03-03)
Wind energy generation systems – Part 12-1: Power performance measurements of electricity producing wind turbines

IEC 61400-13:2015
Edition 1.0 (2015-12-21)
Wind turbines – Part 13: Measurement of mechanical loads

IEC 61400-21:2008
Edition 2.0 (2008-08-13)
Wind turbines – Part 21: Measurement and assessment of power quality characteristics of grid connected wind turbines

IEC 61400-23:2014 Edition 1.0 (2014-04-08)
Wind turbines – Part 23: Full-scale structural testing of rotor blades

Once approved by the WE-OMC, this listing will be submitted to the REMC for approval and subsequent listing in the relevant area of the website (http://www.iecre.org/certification/iecstandards/)

According to IECRE 02 Annex A, A.1.3, these standards are now being submitted to the REMC Member Bodies for approval:

Annex A – OMC Terms of Reference

A.1 Schemes, Rules, Procedures and Standards
A.1.3 Define the scope, requirements and applicable standards to be used for each scheme approved by the REMC for its sector.

ACTION:
REMC Member Bodies to approve the list of standards for use in the WE-OMC. IECRE Member Bodies are requested to vote on the approval no later than
2019-04-19.

NOTE: USNC/IECRE ballots are to be submitted within two weeks to allow for resolution of any comments prior to the IEC deadline.